Updated news:XINDACHENG Equipment appears in the German K Exhibition    Round dripper irrigation pipe production line and drip mould sent to Iran by today.

PE Pipe Production Line

PE Pipe Production Line
Xindacheng Plastic Machinery Company depends on design production experience of many years, join together the domestic and international actual circumstance, developed full-automatic production line which from extruder including all automation units and peripherals, whole production line realizes automatic control from charging to finished product.



  • PLC or temperature gauge control.
  • High extrusion capacity, low melt temperature.
  • Special screw design insure the high-efficiency and high yield.
  • Bevel gear design of high hardness and low noise brings dependable performance with long service life.
  • Adoption direct current speed regulation design for the standard, also the frequency variable speed adjusting and the electromagnetism speed adjust may be chosen.
  • According to the different material extrusion choosing the different extrusion machine.
  • Small type single screw extruder applies to co-extrusion the marking line.

The polyolefin tube sizing
Sizing sleeve with the entrance water curtain is applicable to the HDPE, LDPE and PP etc
On the front end of butterfly type sizing sleeve carrying entrance water curtain there is a closed inside room, which is applicable to the small diameter tube extrusion specially.
The PVC tube sizing:
The sizing sleeve carries precooling equipment at its entrance is applicable to superspeed extrusion.

Polyolefin tube die:
Standard series: Φ10mm-Φ630mm Spiral allotment type or skep types flow divide body.
The best design of the low melting temperature causing small tube internal stress and smooth inside and outward appearance.
High flexibility is applicable to all polyolefin material multi-layer co-extrusion form.


Standard seriesΦ10mm-Φ630mm
Detained time on section of fluid divide body distributes even.
Melting body temperature distributes even.
The special mouthpiece design lowers the replacing time of the molding tool.

The tank body made by stainless steel.
The water pump of high power and spraying head of special design bring high efficient spraying cooling.
On the section of sizing sleeve establish dense and intensive spraying heads.
The percolation unit with the bypass pipeline improved the stability of the equipments and reduce maintenance (pipeline and spray head is blocked due to impurity)
Have the high and low water level control device.
Lengthways move by motor regulating.
Three-dimensional adjusting.
Provide different length and quantity cooling arrangement according to specification and speed of pipe to be produced.
Double pedrails hauling machine
Multi-pedrails hauling machine
Changing frequency speed adjusting system guarantee synchronous hauling off.
By proportion valve and gas pressure control to regulate precisely contact pressure
By the central motor drives all pedrail to attain highly synchronous result.
The automatic tube wall thickness increases and the length measuring device may be chosen.
Blade type machine
The planet type incising machine
The circle cut type incising machine
Have the set dimension and automatic cut function.
Following cut and complete synchronous.
Low noise and high protection design.
Vivid and dependable roller type moves.
Pneumatic control, turn over to unload.
Fixed the length dimension automatically, can provide different length install according to the demand.
For pipes of small diameter and can be winded, two working position wider is recommended.
Mixing machine set
The vacuum automatic feeder
Dry machine
Cold water machine


Type Pipe Spec(mm)


XDC-PE63  φ20-φ63 SJ-45/30 SJ-25/25 120
XDC-PE160 φ63-φ160 SJ-60/30 SJ-25/25 300
XDC-PE250 φ75-φ250 SJ-75/30 SJ-25/25 400
XDC-PE450 φ160-φ450 SJ-90/30 SJ-25/25 600
XDC-PE630 φ315-φ630 SJ-120/30 SJ-25/25 800
XDC-PE800 φ450-φ800 SJ-150/30 SJ-25/25 1000
Picture and technical data are for reference only

Foreign Trade Dept:+86-532-83232898 Add: Fu'an 2nd Industrial area , jiaozhou city P.R. China.            P.C.:266314               E-mail:sales@extruder.cn
Tel:+86-532-83232838                   Fax:+86-532-83233777              After Service:+86-17806283881
Friendly link:  Zeanon Drip Irrigation       Drip Irrigation Pipe        Qingdao Tianchen Plastic Technology Co., Ltd